UPSC Civil Engineering optional syllabus
The official syllabus, topic by topic and module by module, with each topic's share of UPSC questions (2014–2026).
Paper I
Engineering Mechanics, Strength of Materials and Structural Analysis 26.1% of PYQ marks 6 modules
- Engineering Mechanics1.1 Engineering Mechanics : Units and Dimensions, SI Units, Vectors, Concept of Force, Concept of particle and rigid body; Concurrent, Non- Concurrent and parallel forces in a plane, moment of force free body diagram, conditions of equilibrium, Principle of virtual work, equivalent force system; First and Second Moment of area, Mass moment of Inertia; Static Friction; Kinematics and Kinetics: Kinematics in cartesian Co-ordinates, motion under uniform and non-uniform acceleration, motion under gravity; Kinetics of particle : Momentum and Energy principles, collision of elastic bodies, rotation of rigid bodies
- Strength of Materials1.2 Strength of Materials : Simple Stress and Strain, Elastic constants, axially loaded compression members; Torsion of Shafts, Elastic stability of columns, Euler’s, Rankine’s and Secant formulae
- Theory of BendingShear force and bending moment, theory of simple bending, Shear Stress distribution across cross sections, Beams of uniform strength; Unsymmetrical bending : Moment of inertia, product of inertia, position of Neutral Axis and Principal axes, calculation of bending stresses; Plastic Analysis of beams and frames : Theory of plastic bending, plastic analysis, statical method, Mechanism method
- Deflection of StructuresDeflection of beams: Mecaulay’s method, Mohr’s Moment area method, Conjugate beam method, unit load method; 1.3 Structural Analysis : Castiglianio’s theorems I and II, unit load method, of consistent deformation applied to beams and pin jointed trusses
- Indeterminate StructuresSlope-deflection, moment distribution; Arches : Three hinged, two hinged and fixed arches, rib shortening and temperature effects; Matrix methods of analysis : Force method and displacement method of analysis of indeterminate beams and rigid frames
- Influence LinesRolling loads and Influences lines : Influences lines for Shear Force and Bending moment at a section of a beam; Criteria for maximum shear force and bending Moment in beams traversed by a system of moving loads; Influences lines for simply supported plane pin jointed trusses
Design of Structures 23.4% of PYQ marks 4 modules
- Steel ConnectionsSteel, concrete and masonry structures; 2.1 Structural Steel Design : Structural steel : Factors of safety and load factors; Riveted, bolted and welded joints and connections
- Steel MembersDesign of tension and compression members, beams of built up section, riveted and welded plate girders, gantry girders, stancheons with battens and lacings
- Concrete and Masonry Structures2.2 Design of Concrete and Masonry Structures : Concept of mix design; Reinforced Concrete : Working Stress and Limit State method of design—Recommendations of I. S. codes; design of one way and two way slabs, stair-case slabs, simple and continuous beams of rectangular, T and L sections; compression members under direct load with or without eccentricity; Cantilever and Counter fort type retaining walls; Water tanks : Design requirements for Rectangular and circular tanks resting on ground; Design of brick masonry as per I. S. Codes
- Prestressed ConcretePrestressed Concrete : Methods and systems of prestressing, anchorages, Analysis and design of sections for flexure based on working stress, loss of prestress
Fluid Mechanics, open channel flow and Hydraulic Machines 24.9% of PYQ marks 6 modules
- Fluid Mechanics3.1 Fluid Mechanics : Fluid properties and their role in fluid motion, fluid statics including forces acting on plane and curve surfaces; Kinematics and Dynamics of Fluid flow : Velocity and accelerations, stream lines, equation of continuity, irrotational and rotational flow, velocity potential and stream functions; Continuity, momentum, energy equation, Navier Stokes equation, Euler’s equation of motion, application to fluid flow problems, pipe flow, sluice gates, weirs
- Dimensional Analysis3.2 Dimensional Analysis and Similitude: Buckingham’s Pi-theorem, dimensionless parameters
- Viscous Flow3.3 Laminar Flow : Laminar flow between parallel, stationary and moving plates, flow through tube; Turbulent flow through pipes : Characteristics of turbulent flow, velocity distribution and variation of pipe friction factor, hydraulic grade line and total energy line
- Boundary Layer Theory3.4 Boundary layer : Laminar and turbulent boundary layer on a flat plate, laminar sub-layer, smooth and rough boundaries, drag and lift
- Open Channel Flow3.5 Open channel flow : Uniform and non-uniform flows, momentum and energy correction factors, specific energy and specific force, critical depth, rapidly varied flow, hydraulic jump, gradually varied flow, classification of surface profiles, control section, step method of integration of varied flow equation
- Hydraulic Machines3.6 Hydraulic Machines and Hydropower : Hydraulic turbines, types classification, Choice of turbines performance parameters, controls, characteristics, specific speed; Principles of hydropower development
Geotechnical Engineering 25.7% of PYQ marks 3 modules
- Soil MechanicsSoil Type and Structure—gradation and particle size distribution—consistency limits; Water in soil—capillary and structural—effective stress and pore water pressure—permeability concept—field and laboratory determination of permeability—Seepage pressure—quick sand conditions—Shear strength determination—Mohr Coulomb concept; Compaction of soil—Laboratory and field test; Compressibility and consolidation concept— consolidation theory—consolidation settlement analysis
- Earth PressureEarth pressure theory and analysis for retaining walls, Application for sheet piles and Braced excavation
- Foundation EngineeringBearing capacity of soil—approaches for analysis- Field tests—settlement analysis—stability of slope of earth walk; Subsuface exploration of soils—methods Foundation—Type and selection criteria for foundation of structures—Design criteria for foundation—Analysis of distribution of stress for footings and pile—pile group action—pile load test; Ground improvement techniques
Paper II
Construction Technology, Equipment, Planning and Management 23.0% of PYQ marks 4 modules
- Concrete TechnologyLime, Cement, different types of Mortars and Concrete; Specific use of ferro cement, fibre reinforced C. C., High strength concrete
- Building Construction1.1 Construction Technology Engineering Materials : Physical properties of construction materials with respect to their use in construction—Stones, Bricks and Tiles; Timber; Properties defects—common preservation treatments; Use and selection of materials for specific use like Low Cost Housing, Mass Housing, High Rise Buildings; 1.2 Construction : Masonry principles using Brick, stone, Blocks—construction detailing and strength characteristics; Types of plastering, pointing, flooring, roofing and construction features; Common repairs in buildings; Principle of functional planning of building for residents and specific use—Building code provisions; Basic principles of detailed and approximate estimating—specification writing and rate analysis-principles of valuation of real property
- Construction EquipmentMachinery for earthwork, concreting and their specific uses—Factors affecting selection of equipments—operating cost of equipments
- Construction Management1.3 CONSTRUCTION PLANNING AND MANAGEMENT : Construction activity—schedules—organization for construction industry—Quality assurance principles; Use Basic principle of network—analysis in form of CPM and PERT—their use in construction monitoring, Cost optimization and resource allocation; Basic principles of Economic analysis and methods; Project profitability—Basic principles of Boot approach to financial planning-simple toll fixation criterions
Surveying and Transportation Engineering 27.0% of PYQ marks 4 modules
- Surveying2.1 Surveying : Common methods and instruments for distance and angle measurement for CE work—their use in plane table, traverse survey, levelling work, triangulation, contouring and topographical map; Basic principles of photogrammetry and remote sensing
- Railway Engineering2.2 Railways Engineering : Permanent way—components, types and their function-Functions and Design constituents of turn and crossing— Necessity of geometric design of track—Design of station and yards
- Highway Engineering2.3 Highway Engineering : Principles of Highway alignments—classification and geometrical design elements and standards for Roads; Pavement structure for flexible and rigid pavements—Design principles and methodology of pavements; Typical construction methods and standards of materials for stabilized soil, WBM, Bituminous works and CC roads; Surface and sub-surface drainage arrangements for roads—culvert structures; Pavement distresses and strengthening by overlays
- Traffic EngineeringTraffic surveys and their application in traffic planning—Typical design features for channelized, intersection rotary etc.—signal designs—standard Traffic signs and markings
Hydrology, Water Resources and Engineering 25.9% of PYQ marks 6 modules
- Hydrological Cycle3.1 Hydrology : Hydrological cycle, precipitation, evaporation, transpiration, infiltration, overland flow
- Flood Hydrologyhydrograph, flood frequency analyses, flood routing through a reservoir, channel flow routing—Muskingam method
- Groundwater Hydrology3.2 Ground Water flow : Specific yield, storage coefficient, coefficient of permeability, confined and unconfined aquifers, aquifers, aquitards, radial flow into a well under confined and unconfined conditions
- Dams and Reservoirs3.3 Water Resources Engineering : Ground and surface water resources, single and multipurpose projects, storage capacity of reservoirs, reservoir losses, reservoir sedimentation; (vi) Storage works : Types of dams, design, principles of rigid gravity stability analysis; (vii) Spillways : Spillway types, energy dissipation
- Irrigation Engineering3.4 Irrigation Engineering : (i) Water requirements of crops : consumptive use, duty and delta, irrigation methods and their efficiencies; (ii) Canals : Distribution systems for canal irrigation, canal capacity, canal losses, alignment of main and distributary canals, most efficient section, lined canals, their design, regime theory, critical shear stress, bed load; (iii) Water logging : causes and control, salinity
- Irrigation Structures(iv) Canal structures : Design of head regulators, canal falls, aqueducts, metering flumes and canal outlets; (v) Diversion head work : Principles and design of weirs on permeable and impermeable foundation, Khosla’s theory, energy dissipation; (viii) River training : Objectives of river training, methods of river training
Environmental Engineering 20.1% of PYQ marks 5 modules
- Water Supply4.1 Water Supply : Predicting demand for water, impurities of water and their significance, physical, chemical and bacteriological analysis, waterborne diseases, standards for potable water
- Water Treatment4.2 Intake of Water : Water treatment: principles of coagulation, flocculation and sedimentation; slow-, rapid-, pressure, filters; chlorination, softening, removal of taste, odour and salinity
- Sewerage Systems4.3 Sewerage Systems : Domestic and industrial wastes, store sewage—separate and combined systems, flow through sewers, design of sewers; 4.4 Sewage Characterisation : BOD, COD, solids, dissolved oxygen, nitrogen and TOC; Standards of disposal in normal water course and on land
- Sewage Treatment4.5 Sewage Treatment : Working principles, units, chambers, sedimentation tank, trickling filters, oxidation ponds, activated sludge process, septic tank, disposal of sludge, recycling of waste water
- Solid Waste Management4.6 Solid waste : Collection and disposal in rural and urban contexts, management of long-term ill-effects
Environmental pollution 4.0% of PYQ marks 2 modules
- Environmental ManagementSustainable development; Radioactive wastes and disposal; Environmental impact assessment for thermal power plants, mines, river valley projects; Pollution control acts
- Air PollutionAir pollution
Practise every module with UPSC-standard tests and evaluation within 2 hours. See the Civil Engineering test series → · Free sample test